Tamiya presents incredible sound and action options for any 1/14 scale R/C Tractor Truck with the all R/C Tractor Truck Multi-Function Control Unit. This system, when mounted on the truck is located inside the cabin with speaker to the front and the MFC-01 unit to the rear. The control unit is mounted inside the left tool box for easy access.
A 4-channel R/C system activates all functions:
By using your transmitter sticks and the trims you can control the truck movements (forward/backward running and turns), horn, motorized support legs (Item #56505) (sold separately), headlights, position lamps, roof lamps and speed indicators. You can also activate the back lamp, tail lamps and blinkers/hazard lamps as well as engine revving.
20 LED for 9 light functions:
All lamps employed with the multi function unit are high brightness type LED. They are employed to reproduce headlights, position lamps, roof lamps, speed indicators, fog lamps, back lamp, tail lamps and blinkers/hazard lamps, which can be turned on/off with the transmitter.
24 Radio-Controlled Sound Effects:
The multi function unit offers 24 radio-controlled sounds that have been digitally recorded from an actual tractor truck.
1/14 Scale R/C Tractor trucks and Mercedes-Benz 1850L(Item:56307)
Note:Always use 540 Type motor included in kit otherwise the electronic speed controller in the MFC-01 Unit may malfunction.
with some chassis,back lamp,front and rear auxiliary lights,and/or speed indicator cannot be turned on.
Some chassis require extra holes for installation.Use 4mm pin vise for making holes.
Optional Parts Usable Simultaneously:
Item: 56502 Semi-trailer Light Set
Item: 56505 Motorized Support Legs
Note:Tractor Truck Electrical Unit Set(Item: 56501),Tractor Truck Sound Effect Set,and Components included in these items cannot be uesd with or substituted for this unit.
Required R/C System:
This kit requires the folowing items:a 4ch Transmitter(self-neutral stick type with 4ch trims),a 4ch-receiver and 2 servos(3servos are required when installing 56505 motorized Support Legs.). No Electrical speed controlleris required as MFC-01 Unit covers that function.Receiver battery (6V)is not required.
The following 4ch-R/C Unit (transmitter/receiver) is recommended for optimum operation:Futaba Attack 4WD (T4VWD/FP-R114H)
This kit is designated for employing FUTABA,JR or ACOM's R/C unit.Be aware that some R/C units employing no self-neutral system may not realize optimum operation and some sonnectors may not be compatible.
It is recommended to use transmitter or one without trims should not be used at all.
PCM receiver,multi-channel receive and older SANWA receivers(with black case are not available for this kit.
When installing MFC-01 Unit into double axle truck,extension cables for servos may not be required,use extension cables(separately available)to keep reach more than 50cm.)